verify-truck-box.py, ezdxf 1.4.5, files in truck-box
OK   manifest: sheet 0.125, inside radius 1.5 t, K 0.445, gap 0.250, lugs 0.0625
OK   1: RS4001-1-wrap.dxf is DXF AC1009 in inches, layers ['BEND_DOWN', 'BEND_UP', 'CUT'], no audit errors
OK   1 wrap: flat 47.750 x 59.305 (box length less 2 t; nine flanges developed)  47.750 x 59.305
OK   1 wrap: one closed outline of straight edges, every corner in its place and order (20 corners)  20 corners in the file
OK   1 wrap: 8 bend lines, each at its place, of its length and on its up/down layer  8 in the file
OK   1 wrap: 10 hinge rivet holes 0.191 at a 4.722 pitch, 0.562 up the sill band, and no other hole  10 holes in the file
OK   1 wrap: every hole inside the part with at least 0.06 of metal round it (least 2.230)
OK   1 wrap: nothing else on the CUT layer  0 lines, 0 arcs, 0 other
OK   2L: RS4001-2L-end-left.dxf is DXF AC1009 in inches, layers ['BEND_DOWN', 'BEND_UP', 'CUT'], no audit errors
OK   2L end panel: flat 20.896 x 18.000 (stop, jamb, band and plate developed)  20.896 x 18.000
OK   2L end panel: one closed outline of straight edges, every corner in its place and order (20 corners)  20 corners in the file
OK   2L end panel: 3 bend lines, each at its place, of its length and on its up/down layer  3 in the file
OK   2L end panel: 2 cable tab rivet holes 0.191, 10.000 from the front and 9.400 up, and no other hole  2 holes in the file
OK   2L end panel: every hole inside the part with at least 0.06 of metal round it (least 0.309)
OK   2L end panel: nothing else on the CUT layer  0 lines, 0 arcs, 0 other
OK   2R: RS4001-2R-end-right.dxf is DXF AC1009 in inches, layers ['BEND_DOWN', 'BEND_UP', 'CUT'], no audit errors
OK   2R end panel: flat 20.896 x 18.000 (stop, jamb, band and plate developed)  20.896 x 18.000
OK   2R end panel: one closed outline of straight edges, every corner in its place and order (20 corners)  20 corners in the file
OK   2R end panel: 3 bend lines, each at its place, of its length and on its up/down layer  3 in the file
OK   2R end panel: 2 cable tab rivet holes 0.191, 10.000 from the front and 9.400 up, and no other hole  2 holes in the file
OK   2R end panel: every hole inside the part with at least 0.06 of metal round it (least 0.309)
OK   2R end panel: nothing else on the CUT layer  0 lines, 0 arcs, 0 other
OK   3: RS4001-3-door.dxf is DXF AC1009 in inches, layers ['BEND_UP', 'CUT'], no audit errors
OK   3 door: flat 48.028 x 18.028 (the opening less 0.250 all round; return 1.00 and lip 0.75 developed)  48.028 x 18.028
OK   3 door: one closed outline of straight edges, every corner in its place and order (28 corners)  28 corners in the file
OK   3 door: 8 bend lines, each at its place, of its length and on its up/down layer  8 in the file
OK   3 door: 8 latch studs 0.28 on 3.87 x 3.31, 4 cable tab rivets 0.191 symmetric, 14.650 up, and no other hole  12 holes in the file
OK   3 door: cable tabs 5.250 from the box ends and 1.50 under the door top  5.250
OK   3 door: 2 latch cut-outs 3.87 x 3.16 R 0.38 with the key lobe 1.12 x 0.43 R 0.56, top 14.965 up (0.075 under the top studs); nothing else on the CUT layer  14 lines, 10 arcs in the file
OK   3 door: every hole inside the part with at least 0.06 of metal round it (least 0.073)
OK   4: RS4001-4-cable-tab.dxf is DXF AC1009 in inches, layers ['BEND_UP', 'CUT'], no audit errors
OK   4 cable tab: flat 1.000 x 1.757 (legs 1.00 x 1.00 developed)  1.000 x 1.757
OK   4 cable tab: one closed outline of straight edges, every corner in its place and order (4 corners)  4 corners in the file
OK   4 cable tab: 1 bend lines, each at its place, of its length and on its up/down layer  1 in the file
OK   4 cable tab: 2 rivet holes 0.191 0.40 from the riveted edge and a 0.270 cable eye, and no other hole  3 holes in the file
OK   4 cable tab: every hole inside the part with at least 0.06 of metal round it (least 0.154)
OK   4 cable tab: nothing else on the CUT layer  0 lines, 0 arcs, 0 other
OK   manifest: weights = flat area x 1.90 lb/ft2 (tread; the door with its corner welds), within 0.6 %  1-wrap 37.32/37.37, 2-end-left 4.87/4.87, 2-end-right 4.87/4.87, 3-door 10.94/10.98
OK   manifest: box cable tabs 10.000 from the front and 10.000 up (10/18 of the depth and height, at least 0.4 H + 1.5 back), eye 0.725 off the end plate
OK   cables: the open door's cable passes the stop plane 0.507 inside the stop (0.29 or more)  x 2.257

Aluminium sheet parts: 58.2 lb
ALL CHECKS PASSED